? 2013 littelfuse, inc. specifcations are subject to change without notice. revised: 10/10/13 description applications zener diodes fabricated in a proprietary silicon avalanche technology protect each i/o pin to provide a high level of protection for electronic equipment that may experience destructive electrostatic discharges (esd). these robust diodes can safely absorb repetitive esd strikes above the maximum level specifed in the iec 61000-4-2 international standard (level 4, 8kv contact discharge) without performance degradation. their very low loading capacitance also makes them ideal for protection high- speed signal pins. features ? esd, iec61000-4-2, 15kv contact, 30kv air ? lightning, iec61000-4-5, 2a (t p =8/20s) ? low capacitance of 7 pf (typ) per i/o @ 2.5v ? low leakage current of 1a (max) at 5v ? tiny dfn( jedec mo- 229) package (1.25mm x 1.0mm x 0.5mm) ? eft protection iec61000-4-4, 40a (5/50ns) ? lcd/pdp tv ? dvd player ? desktop ? set top box ? mobile phone ? notebook ? mp3/pmp ? digital camera pinout i/o (1) gnd gnd i/o (4 ) i/o (2) i/o (3) dfn-6 (1 .25x1 .0x0.5mm) functional block diagram 65 4 1 2 3 life support note: not intended for use in life support or life saving applications the products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. rohs pb green application example shield ground SP1011-04UTG outside w orld input keyboard controller d1 d2 d3 d4 signal ground sp1011 series 7pf 15kv unidirectional tvs array additional information datasheet samples resources tvs diode arrays (spa ? diodes) general purpose esd protection - sp1011 series
? 2013 littelfuse, inc. specifcations are subject to change without notice. revised: 10/10/13 caution: stresses above those listed in absolute maximum ratings may cause permanent damage to the device. this is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specifcation is not implied. absolute maximum ratings symbol parameter value units i pp peak pulse current (t p =8/20s) 2 a t op operating temperature C40 to 125 c t stor storage temperature C55 to 150 c thermal information parameter rating units storage temperature range C55 to 150 c maximum junction temperature 150 c maximum lead temperature (soldering 20-40s) 260 c electrical characteristics (t op =25oc) parameter symbol test conditions min typ max units reverse voltage drop v r i r = 1ma 6.0 8.5 v reverse standoff voltage v rwm i r 1a 6 v reverse leakage current i leak v r = 5v 0.1 1 a clamp voltage 1 v c i pp =1a, t p =8/20s, fwd 8.7 v i pp =2a, t p =8/20s, fwd 10.2 v dynamic resistance r dyn (v c2 - v c1 ) / (i pp2 - i pp1 ) 1. 5 esd withstand voltage 1 v esd iec61000-4-2 (contact discharge) 15 kv iec61000-4-2 (air discharge) 30 kv diode capacitance 1 c d reverse bias = 0v 12 15 pf reverse bias = 2.5v 7 pf note: 1. parameter is guaranteed by design and/or device characterization. capacitance vs. reverse bias 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 dc bias (v) capacitance (pf) insertion loss (s21) i/o to gnd -30 -25 -20 -15 -10 -5 0 5 0 0 0 0 1 0 0 0 1 0 0 1 0 1 frequency (mhz) attenuation (db) tvs diode arrays (spa ? diodes) general purpose esd protection - sp1011 series
? 2013 littelfuse, inc. specifcations are subject to change without notice. revised: 10/10/13 package dimensions dfn-6 (1.25x1.0x0.5mm) package dfn-6 (1.25x1.0x0.5mm) jedec mo-229 symbol millimeters inches min max min max a 0.45 0.55 0.018 0.022 a1 0.00 0.05 0.000 0.002 a3 0.127 ref 0.005 ref b 0.15 0.25 0.006 0.010 d 1.20 1.30 0.047 0.051 d2 - - - - e 0.95 1.05 0.037 0.041 e2 - - - - e 0.4 ref 0.016 ref l 0.25 0.35 0.010 0.014 d e b 1 2 3 65 4 top view pin 1 index area a a 1 2 3 5 4 6 l pin 1 chamfer 0.10 x 45 ? ? 0.05 c bottom view 0.05 c 0.05 c b a1 a3 c seating plan e side view 0.10 c a m b 0.05 c m recommanded soldering pad for dfn-6l 1.25 x1.0x0.5 mm 1.1 0.4 0.1 0.3 0.3 0.4 1.1 t otal:+/- 0.01mm ti me te mperature t p t l t s(max) t s(min) 25 t p t l t s time to peak temperature preheat p rehea t ramp-up r amp-up ramp-down r amp-d o critical zone t l to t p c ritical zo n e t l to t p refow condition pb C free assembly pre heat - temperature min (t s(min) ) 150c - temperature max (t s(max) ) 200c - time (min to max) (t s ) 60 C 180 secs average ramp up rate (liquidus) temp (t l ) to peak 3c/second max t s(max) to t l - ramp-up rate 3c/second max refow - temperature (t l ) (liquidus) 217c - temperature (t l ) 60 C 150 seconds peak temperature (t p ) 260 +0/-5 c time within 5c of actual peak temperature (t p ) 20 C 40 seconds ramp-down rate 6c/second max time 25c to peak temperature (t p ) 8 minutes max. do not exceed 260c soldering parameters tvs diode arrays (spa ? diodes) general purpose esd protection - sp1011 series
? 2013 littelfuse, inc. specifcations are subject to change without notice. revised: 10/10/13 embossed carrier tape & reel specifcation dfn-6 (1.25x1.0x0.5mm) ordering information part number package marking min. order qty. SP1011-04UTG dfn-6 (1.25x1.0x0.5mm) o4 3000 product characteristics lead plating pre-plated frame lead material copper alloy lead coplanarity 0.0004 inches (0.102mm) substitute material silicon body material molded epoxy flammability ul 94 v-0 notes : 1. all dimensions are in millimeters 2. dimensions include solder plating. 3. dimensions are exclusive of mold fash & metal burr. 4. blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form. 5. package surface matte fnish vdi 11-13. part numbering system part marking system sp 1011 04 u t g series number of channels package u: dfn-6 t= tape & reel g= green ? tvs diode arrays (spa ? diodes) o*4 o 4 product series number of chan ne ls o = sp1011 assembly site (varies) * k0 a0 b0 p2 d1 p0 t f e w d symbol millimeters inches min max min max e 1.65 1.85 0.06 0.07 f 3.45 3.55 0.14 0.14 d1 0.50 0.65 0.02 0.03 d 1.50 min 0.06 min p0 3.90 4.10 0.15 0.16 10p0 40.0 0.20 1.57 0.01 w 7.90 8.30 0.31 0.33 p2 1.95 2.05 0.08 0.08 a0 1.09 1. 19 0.04 0.05 b0 1.42 1.52 0.06 0.06 k0 0.71 0.81 0.03 0.03 t 0.25 typ 0.01 typ tvs diode arrays (spa ? diodes) general purpose esd protection - sp1011 series
|
